Skip to main content

Grain

Grain allows you to add noise, or random pixels, to the screen to create a textured effect.

properties

Add Grain

To add a Grain effect:

  1. Go to the Inspector panel.
  2. Click + Add Component.
  3. Go to Post Effect.
  4. Click Post Process.
  5. Under the Post Process property, click Add Effect.
  6. Click Grain.

Properties

PropertyDescription
StrengthThe strength of the grain. Values range between 0.00 and 1.00.
ColorThe strength of the grain color. Values range between 0.00 and 1.00.
SpeedThe blinking strength of the grain. Values range between 0.00 and 10.00. See the demonstration below.

Demonstrations

Speed

image-0
image-1

Speed = 0.00

Speed = 10.00